Exterior Wash Pro M QUAD - Proiector arhitectural cu Creative Control - Martin

Physical:

• Length: 152 mm (5.98 inch.)
• Width: 201 mm (7.91 in.)
• Height: 303 mm (11.93 in.)
• Weight: 7.3 kg (16.1 lbs)

Dynamic Effects:

• Intensity: 0 - 100 %
• Color mixing: RGB + CTC (Color Temperature Control)
• Color temperature control: 1000 K - 12500K in 50K steps

Control And Programming:

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer Resolution: 16-bit DMX control of intensity
• DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics:

• Light source: 9 x high-power RGBW LEDs
• Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*
• LED manufacturer: Osram
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
• *Figure obtained under manufacturer's test conditions at Ta = 25° C.

Beam Angle Options:

• Native beam angle: 8°
• Narrow micro lens: 11°
• Medium micro lens: 15°
• Wide micro lens: 30°
• Very Wide micro lens: 50°
• Asymmetric micro lens: 8° x 50°

Photometric Data:

• CRI (Color Rendering Index) : > 70
• CCT: 1000K - 12500K (Default 4000K)

Luminous Output:

• Full: 3200 lm
• Red: 1100 lm
• Green: 2200 lm
• Blue: 750 lm

Construction:

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 or Traffic white RAL 9016 - other colors available on request
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.056 m² / 0.072 m²
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Installation:

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

Connections:

• Power connection: 2 m (6.5 ft.) cable tail open ended
• Power input cable type, EU models: H05RR-F 3G 1.5 mm², 300/500 V, VDE
• Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
• Data connection: 2 m (6.5 ft.) open ended 6-conductor combined input + output cable tail
• Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

Electrical:

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 12 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor: 0.99 @110 V / 120 V, 0.94 @208 V / 230V, 0.90 @277 V
• Max current draw: 0.75 A @100 V, 0.62 A @120 V, 0.33 A @230 V, 0.27 A @ 277 V

Maximum Power And Current:

• Maximum: 75 W (reduced mode 60W)*
• Idle: 2.5 W*

Thermal:

• Cooling: Convection
• Total heat dissipation (calculated, +/- 10%): 256 BTU/hr
• Maximum ambient temperature: 45° C (113° F)*
• Minimum ambient temperature: -30° C (-22° F)**

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 43 lm/W
• LWR*: 438 lm/kg (199 lm/lb)*

Approvals:

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• US safety: ANSI/UL 1598
• US EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• Canadian safety: CSA C22.2 No. 250.0
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322(Part5/section5) - Pending

Ordering Information:

• Exterior Wash Pro M QUAD, EU, white: P/N MAR-90590102
• Exterior Wash Pro M QUAD, EU, grey: P/N MAR-90590002
• Exterior Wash Pro M QUAD, US, grey: P/N MAR-90590006
• Micro Lens Pro M - Narrow: P/N MAR-90590031
• Micro Lens Pro M - Medium: P/N MAR-90590032
• Micro Lens Pro M - Wide: P/N MAR-90590033
• Micro Lens Pro M - Very Wide: P/N MAR-90590034
• Micro Lens Pro M - Asymmetric: P/N MAR-90590035
• Baffle Snoot Pro M QUAD: P/N MAR-90590018
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050