In perioada 19.06 - 30.06.2024 suntem in vacanta. Comenzile plasate in aceasta perioada vor fi procesate incepand cu data de 01.07.2024. Va multumim pentru intelegere.

Martin Exterior Wash Pro M CTC - Proiector arhitectural cu Temperature Control - Martin

Noul proiector arhitectural Wash, cu certificare IP66 și Temperature Control
Dimensiune:
Cod Produs: PRO M CTC L Ai nevoie de ajutor? 0790 99 99 22
  • Descriere
  • Caracteristici
  • Video (1)
  • Review-uri (0)
Engineered for harsh conditions and creativity, Exterior Wash Pro M CTC provides a logical, user-friendly and versa¬tile lighting solution designed to illuminate mid-sized structures and building facades. Featuring external lenses and an optional baffle snoot, this fixture provides configurable beam control. Exterior Wash Pro M CTC offers dedicated color temperature control from 2400K-6500K. Designed for permanent outdoor installations and backed by a 5-year warranty, this fixture meets rigorous environmental standards.

FEATURES
  • Logic family of four sizes and lumen packages (S, M, L, XL)
  • Compact and slim design
  • Extended color temperature control from 2400K - 6500K
  • More than 60 lm/W efficacy
  • Narrow beam-angle using high-power LEDs
  • Optional baffle snoot
  • Externally mounted micro lens diffusers
  • RDM and DMX control
  • Local diagnostics and focusing via magnetic sensor
  • Power and DMX In/Out pre-mounted cables
  • Optional Hybrid In/Out cable solution
  • Fully weatherized housing (IP66, IK08 and C-5 High corrosion rating)
  • 5-year warranty

Physical:

  • Length: 152 mm (5.98 inch.)
  • Width: 201 mm (7.91 inch.)
  • Height: 303 mm (11.93 inch.)
  • Weight: 7.3 kg (16.1 lbs)

Dynamic Effects:

  • Intensity: 0 - 100 %
  • Color temperature control: 2400K - 6500K

Control And Programming:

  • Control systems: DMX, RDM
  • User interface: Magnetic sensor for local diagnostics and focusing
  • Stand-alone control: Up to 20 scenes with individual fade/hold times
  • Control resolution: 8-bit DMX control of each color
  • Dimmer Resolution: 16-bit DMX control of intensity
  • DMX channels: 3/3 (Standard/Basic)
  • DMX compliance: USITT DMX512/1990
  • RDM compliance: ANSI/ESTA E1.20
  • DMX/RDM Transceiver: Galvanic-isolated RS-485
  • Firmware update: Serial upload via DMX link

Optics:

  • Light source: 5 x 2400K, 5 x 4000K, 6 x 6500 K white color LEDs
  • Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*
  • LED manufacturer: Cree
  • Binning: Tight color and flux binning
*Figure obtained under manufacturer's test conditions at Ta = 25° C.

 

Beam Angle Options:

  • Native beam angle: 7°
  • Narrow micro lens: 9°
  • Medium micro lens: 15°
  • Wide micro lens: 30°
  • Very Wide micro lens: 50°
  • Asymmetric micro lens: 8° x 60°

Photometric Data:

  • CRI (Color Rendering Index) : > 70
  • CCT: 2400K - 6500K (default 4000K)

Luminous Output:

  • 2400K: 2000 lm
  • 4000K: 4600 lm
  • 6500K: 3600 lm
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.

 

Construction:

  • Housing: Cast Aluminum
  • Color: Traffic grey RAL 7042 - other colors available on request
  • Surface treatment: Anodized and electrostatic powder-coated
  • Protection rating: IP66
  • Effective Projected Area (EPA): 0.056 m² / 0.072 m²
  • Impact resistance: IK08
  • Corrosion resistance: C5 High (ISO 12944-6)
  • Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Installation:

  • Mounting: Adjustable bracket
  • Orientation: Any
  • Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

Connections:

  • Power connection: 2 m (6.5 ft.) cable tail open ended
  • Power input cable type, EU models: H05RR-F 3G 1.5 mm², 300/500V, VDE
  • Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
  • Data connection: 2 m (6.5 ft.) open ended 6-conductor combined input + output cable tail
  • Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

Electrical:

  • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch-mode
  • Typical half-cycle RMS inrush current: 12 A
  • Surge protection: 4 KV
  • Max earth leakage: 0.5 mA
  • Power factor: 0.99 @110 V / 120 V, 0.94 @208 V / 230V, 0.90 @277 V
  • Max current draw: 0.75 A @100 V, 0.62 A @120 V, 0.33 A @230 V, 0.27 A @ 277 V

Maximum Power And Current:

  • Maximum: 75 W (reduced mode 60W)*
  • Idle: 2.5 W*
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

 

Thermal:

  • Cooling: Convection
  • Total heat dissipation (calculated, +/- 10%): 256 BTU/hr
  • Maximum ambient temperature: 45° C (113° F)*
  • Minimum ambient temperature: -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**Power must be maintained below -20° C (-4° F)

 

Environmental:

  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant
  • Efficacy (max output): 63 lm/W
  • LWR*: 603 lm/kg (273 lm/lb)*
  • Packaging: FSC certified cardboard inlay and outer box

Approvals:

  • Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
  • EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
  • US safety: ANSI/UL 1598
  • US EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
  • Canadian safety: CSA C22.2 No. 250.0
  • Australia/NZ: RCM
  • United Kingdom: UKCA
  • India: BIS IS 10322(Part5/section5) - Pending

Ordering Information:

  • Exterior Wash Pro M CTC, US, grey: P/N MAR-90590014
  • Exterior Wash Pro M CTC, EU, grey: P/N MAR-90590010
  • Micro Lens Pro M - Narrow: P/N MAR-90590031
  • Micro Lens Pro M - Medium: P/N MAR-90590032
  • Micro Lens Pro M - Wide: P/N MAR-90590033
  • Micro Lens Pro M - Very Wide: P/N MAR-90590034
  • Micro Lens Pro M - Asymmetric: P/N MAR-90590035
  • Exterior Wash Pro Multitool: P/N MAR-90590025
  • Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
  • Attachment plate for safety wire: P/N MAR-90590050
  • Baffle Snoot Pro M CTC: P/N MAR-90590022

Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Review-ul a fost trimis cu succes.

Suport clienti L - V: 10:00 - 18:00; S, D - Inchis

0790 99 99 22 office@cleansound.ro

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!