VC-Dot 1 - Lumini LED (Puncte Led) Small - Martin

Physical:

• Pixel dimensions: 28 x 23 x 11 mm (1.1 x 0.9 x 0.5 in.)
• Pixel dimensions with dome: 28 mm x 23 mm x 20 mm (1.1 x 0.9 x 0.8 in.)
• Weight: 1.3 kg (2.9 lbs.) for 100 Dots, 100 mm (4.0 in.) spacing, with 2 m (6.6 ft.) lead-in cable and connector
• Maximum number of pixels per string: 100
• Standard pixel spacing (pitch): 100 mm (4.0 in.)
• Minimum pixel spacing (pitch): 100 mm (4.0 in.)
• Maximum pixel spacing (pitch): 1000 mm (39.4 in.)
• Standard lead-in cable length: 2000 mm (78.8 in.)
• Maximum lead-in cable length: 5000 mm (196.9 in.)

Control And Programming:

• Control options: Martin™ P3 System controller and/or DMX
• Control modes: Calibrated and raw
• Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
• DMX channels: 3 per RGB Dot, string or group
• Setting and addressing: P3 System Controller or RDM-compliant controller
• Color and intensity calibration: Dot-level
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20

Optics:

• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• LED manufacturer: Cree
• Binning: Tight color and flux binning
• Calibration: Full Gamut Pixel Calibration

Photometric Data:

• Light source : One RGB LED
• Viewing angle: 127° x 127°
• Viewing angle with dome: 180° x 180°
• Luminous intensity, RGB, calibrated mode: 2 cd
• Luminous intensity, RGB, raw mode: 2.5 cd
• Total output, RGB, calibrated mode: 5.4 lm
• Red output, RGB, calibrated mode: 1.5 lm
• Green output, RGB, calibrated mode: 3.6 lm
• Blue output, RGB, calibrated mode: 0.4 lm

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
 

Construction:

• Dot: Clear polycarbonate, clear silicone filled
• Diffuser dome: White translucent polycarbonate
• Mounting clip: White polycarbonate
• Interconnecting cable: 6 x 20 AWG, black
• Minimum cable bend radius: 26 mm (1.1 in.)
• Protection rating: IP67
• RoHS compliant

Installation:
Orientation: Any

Connections: Power & data input to VC-Dot string from VC-Feeder™: Custom 8-pin connector, IP67-rated

Electrical:

• Power and data converter: Martin VC-Feeder™
• Peak power consumption (at full intensity, full white): 0.95 W per Dot
• Typical power consumption (with typical video content): 0.32 W per Dot

Thermal:

• Cooling: Convection
• Maximum ambient temperature (Ta max.): 55° C
• Minimum operating temperature (Ta min): -20° C
• Peak heat dissipation (calculated, at full intensity, full white): 1.4 BTU/hr.
• Typical heat dissipation (calculated, with typical video content): 0.5 BTU/hr.

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant

Approvals:

• EU safety: EN 60950-1
• EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
• US safety: UL 60950-1
• US EMC: FCC Part 15 Class A
• Canadian safety: CSA C22.2 No. 60950-1
• Canadian EMC: ICES-003 Class A
• Australia/NZ: C-TICK N4241
• India: BIS

Related Items:

• Martin VC-Feeder™ with BBD connector: P/N 90357041
• Martin P3™ PowerPort 1500: P/N 90721040
• Martin P3™ PowerPort 1000 IP Installation: P/N 90721080
• Martin P3™ PowerPort 1000 IP Rental: P/N 90721070
• Martin DMX PowerPort 375: P/N 90721094
• Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330
• Martin P3-050™ System Controller: P/N 90721090
• Martin P3-150™ System Controller: P/N 90721015
• Martin P3-300™ System Controller: P/N 90721060
• Martin P3-PC™ System Controller: Free download from martin.com

Accessories:

• VC-Dots ribbon cable extension, 10 m (32.8 ft.): P/N 90357230
• Quick splice connectors for VC-Dots ribbon cable extension, set of 15: P/N 90357240
• VC-Dots ribbon cable termination cap, set of 10: P/N 91611400
• VC-Dot 1 Diffuser Domes, set of 10: P/N 90357180
• VC-Dot 1 Diffuser Domes, Smoked, 10 pcs: P/N 91610110
• VC-Dot 1 Mounting Clips, set of 10: P/N 90357210
• VC-Dot 1 Truss Clips, set of 10: P/N 91611371
• VC-Dot 1 Mounting Bracket: P/N 91611301
• VC-Dot 1 Mounting Profile Cover, Black, 2 m (6.6 ft.): P/N 91611375
• VC-Dot 1 Mounting Profile End Caps, Black, set of 10: P/N 91611376
• VC-Dot 1 Mounting Profile Cable Entry End Caps, Black, set of 10: P/N 91611377
• VC-Dot 1 Aluminum Mounting Profile, Grey, 2 m (6.6 ft.): P/N 91611386
• VC-Dot 1 Mounting Profile Cover, Grey, 2 m (6.6 ft.): P/N 91611387
• VC-Dot 1 Mounting Profile End Caps, Grey, set of 10: P/N 91611388
• VC-Dot Mounting Profile Cable Entry End Caps, Grey, set of 10: P/N 91611389
• VC-Dot 1 Plastic Mounting Profile, Black, 1.2 m (4.0 ft.): P/N 91611410
• VC-Dot 1 Plastic Mounting Profile Cover, Black, 1.2 m (4.0 ft.): P/N 91611420
• VC-Dot 1 Plastic Mounting Profile, White, 1.2 m (4.0 ft.): P/N 91611430
• VC-Dot 1 Plastic Mounting Profile Cover, White, 1.2 m (4.0 ft.): P/N 91611440

Ordering Information:

• VC-Dot 1™ RGB, 100 mm (4.0 in.) pitch, 100 pcs., 2 m (6.6 ft.) lead-in: P/N 90357060