MARTIN ELP WW IP - Reflector IP65 cu LED Alb - Martin

Physical:

• Length: 644 mm (25.4 in.)
• Width: 255 mm (10.1 in.)
• Height: 255 mm (10.1 in.), 527 mm (20.1 in.) with bracket
• Weight: 11 kg (24.3 lb.) body only

Dynamic Effects:

• Electronic dimming: 0–100%, Four dimming curve options
• Strobe and pulse effects: Variable speed and action, random strobe
• Electronic shutter effect: Instant open and blackout

Control And Programming:

• Control options: DMX, stand-alone
• DMX channels: 1/2/4
• 16-bit control: Intensity
• DMX address setting: Control panel with OLED display or via RDM
• PWM: 600–2400 Hz
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: Opto-isolated RS-485
• Stand-alone programming: Control panel with OLED display

Optics:

• Light source: 91 x 3 W warm white LEDs
• Minimum LED lifetime: 30 000 hours (to >70% luminous output)*
• Color temperature: 3000K
• Fixed Lens Tube Options: 19°, 26°, 36° and 50°Zoom Lens Tube Options: 15–30° and 25–50°
• Binning: Tight color and flux binning

Photometric Data:

• Light engine luminous output: 16000 lumens
• Fixture luminous output: 7000 lumens
• CRI (Color Rendering Index) : >97
• CQS (Color Quality Scale): >93
• TM-30 Rf (IES TM-30-15 Fidelity Index): >93
• TM-30 Rg (IES TM-30-15 Gamut Index): >101
• TLCI (Television Lighting Consistency Index): >96

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
 

Construction:

• Housing: Die-cast aluminum
• Color: Black or white variant
• Protection rating: IP65

Gobos And Color Frame:

• Gobo size : A size, 100 mm OD, 75 mm image*
• Gobo size: B size, 86 mm OD, 64.5 mm image*
• Color frame size: 159 x 159 mm (6.25 in. x 6.25 in.)

Installation:

• Mounting: Adjustable bracket
• Location: Indoor, outdoor use, suitable for wet locations
• Orientation: Any
• Minimum distance to combustible materials: 0.2 m (0.7 ft.)
• Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)V

Connections:

• AC power in, thru: P65-rated Neutrik PowerCON TRUE1 TOP
• DMX & RDM data in/thru: IP65-rated 5-pin XLR

Electrical:

• AC power: 100–240 V nominal, 50/60 Hz
• Idle power (zero intensity): 5 W
• Power supply unit: Auto-ranging electronic switchmode
• Half-cycle RMS inrush current at 230 V, 50 Hz: 18.0 A
• Fixture link via PowerCON at 100-120 V: Up to 4 fixtures
• Fixture link via PowerCON at 200-240 V: Up to 9 fixtures
• Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power And Current:

• 110 V, 60 Hz: 2.6 A, 280 W, PF 0.99
• 208 V, 60 Hz: 1.4 A, 270 W, PF 0.97
• 230 V, 50 Hz: 1.2 A, 269 W, PF 0.96
• 240 V, 50 Hz: 1.2 A, 268 W, PF 0.96

Thermal:

• Cooling: Forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 0° C (32° F)
• Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1000 BTU/hr.

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 28 lm/W
• LWR*: 636 lm/kg (288 lm/lb)

LWR = Lumen-to-Weight Ratio
 

Approvals:

• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
• EU safety: EN 60598-2-17 (EN 60598-1), EN62471, EN62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-3 (B)/NMB-3 (B); ICES-5 (B)/NMB-5 (B)
• Australia/NZ: RCM

Related Items:

• Martin Companion Cable: P/N 91616091
• Martin ELP Lens Tube 19°: P/N 9045107782
• Martin ELP Lens Tube 19° White : P/N 9045115166
• Martin ELP Lens Tube 26°: P/N 9045107783
• Martin ELP Lens Tube 26° White : P/N 9045115167
• Martin ELP Lens Tube 36°: P/N 9045107784
• Martin ELP Lens Tube 36° White : P/N 9045115168
• Martin ELP Lens Tube 50°: P/N 9045107785
• Martin ELP Lens Tube 50° White : P/N 9045115170
• Martin ELP Zoom Lens Tube 15–30°: P/N 9045121618
• Martin ELP Zoom Lens Tube 15–30°, White: P/N 9045122108
• Martin ELP Zoom Lens Tube 25–50°: P/N 9045121619
• Martin ELP Zoom Lens Tube 25–50°, White: P/N 9045122109

Accessories:

Power Input Cables (16 A)*

• Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
• Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
• Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
• Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174

• Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91611784
• Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91611785
• Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611796
• Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170
• Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171
• Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172

Power Connectors*

• Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788HU
• Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789HU

*All TRUE1 connectors are IP65-rated TOP type
 

Spare Parts
Pressure Relief Valve with Gore membrane, M12 x 1.5: P/N 5127883-00
 

Installation hardware

• G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
• Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
• Half-coupler clamp: P/N 91602005
• Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
• Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information:

• Martin ELP WW IP (Body Only): P/N 9045122813
• Martin ELP WW IP (Body Only), White: P/N 9045122815