ELP Par - Proiector tip PAR cu LED - Martin

Physical:

• Length: 312 mm (12.3 in.)
• Width: 287 mm (11.3 in.)
• Height: 401 mm (15.8 in.) with bracket
• Weight: 7.8 kg (17.2 lbs.)

Dynamic Effects:

• Color mixing: RGBWColor presets:48
• Color presets, virtual color wheel effects
• Color temperature control: Variable 1,800 – 12,850K
• Electronic dimming: 0 - 100%, four dimming curve options
• Strobe and pulse effects: Variable speed and action, random strobe
• Electronic shutter effect: Instant open and blackout
• Zoom: Motorized

Control And Programming:

• Control options: DMX, RDM
• DMX channels: 14
• 16-bit fine control: Dimming, RGB, zoom
• LED color management modes: Raw, extended and calibrated
• DMX address setting: Control panel with OLED display
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Firmware update: via DMX using Martin Companion

Optics:

• Light source: 7 x 40 W RGBW Osram LEDs
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• Beam angle (half-peak): 4.2° - 38.7°
• Field angle (one-tenth peak): 5.1° - 58.6°
• Cutoff angle (3%): 5.7° - 69.6°
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration
• *Figure obtained under manufacturer's test conditions

Photometric Data:

• Wide beam: 3525 lumens
• Narrow beam: 1445 lumens
• Fixture Center Intensity Narrow Beam: 390083 cd
• Fixture Center Intensity Wide beam: 9957 cd
• CRI (Color Rendering Index) : >70
• CQS (Color Quality Scale): 83
• TM-30 Rf (IES TM-30-15 Fidelity Index): 77
• TM-30 Rg (IES TM-30-15 Gamut Index): 117
• TLCI (Television Lighting Consistency Index): 61
• CCT: 6500 Kelvin
• LED refresh rate - Standard Mode: 3600 Hz
• LED refresh rate - Theatre Mode: 19200 Hz

Construction:

• Housing: Aluminum and composite
• Filter mount: 191 x 191 mm (7.5 x 7.5 in.)
• Color: Black
• Protection rating: IP 20

Installation:

• Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
• Location: Not for household use, indoor use in dry location only
• Orientation: AnyMinimum distance to combustible materials: 0.5 m (1.7 ft.)
• Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
• Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)

Connections:

• AC power input/output: Neutrik PowerCON TRUE1 TOP
• DMX and RDM data in/out: Neutrik 5-pin locking XLR

Electrical:

• AC power: 100-240 V nominal, 50/60 Hz
• Typical power consumption: 300 W
• Typical half-cycle RMS inrush current at 240 VAC: 8.7 A
• Power supply unit: Auto-ranging electronic switch mode

Maximum Power And Current:

• 100-120 V, 60 Hz : 3.0 A, 320 W, Power factor 0.991
• 220-240 V, 50 Hz: 1.7 A, 320 W, Power factor 0.941
• *Measurements made at nominal voltage with all LEDs at full intensity.
• Allow for a deviation of +/- 10%.

Thermal:

• Maximum surface temperature: 65° C (149° F)
• Cooling: Forced air (temperature regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): -10° C (14° F)
• Total heat dissipation (calculated): 1170 BTU/hr.

Acoustic Data:

• Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.1 dB(A)
• Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 33.0 dB(A)

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 14.9 lm/W
• LWR*: 449 lm/kg (204 lm/lb)
• LWR = Lumen-to-Weight Ratio

Approvals:

• Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3,
• EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class B
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class B, ICES-005 Class B
• Australia/NZ: RCM
• United Kingdom: UKCA

Included Items:

• Adjustable mounting bracket
• Safety and Installation Manual

Related Items:

• Martin Companion Cable (for firmware update over DMX): P/N 91616091
• Martin Companion Software (for firmware update over DMX): Free download from www.martin.com

Accessories:      
Power Input Cables

• Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
• Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91611786
• Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173
• Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91610174

• Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
• Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
• Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
• Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
• Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
• Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

Power Connectors

• Power Connector, Cable Mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789HU
• Power Connector, Cable Mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788HU

Installation Hardware

• G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
• Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
• Half-coupler Clamp: P/N 91602005
• Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
• Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information:

• ELP PAR in cardboard box: P/N MAR-90800000
• ELP PAR - White in cardbord box: P/N MAR-90800005