Physical:
- Weight: 44.0 kg (97.0 lbs.)
- Minimum center-to-center distance in side-by-side installation: 830 mm (32.7 in.)
- Length (head): 660 mm (26.0 in.)
- Length (base): 468 mm (15.5 in.)
- Width (base): 312 mm (12.3 in.)
- Width (across yoke): 520 mm (20.5 in.)
- Height (head straight up): 864 mm (34.1 in.)
- Height (maximum): 876 mm (34.5 in.)
Dynamic Effects:
- Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
- Color mixing: CMY, independently variable 0 - 100%
- Color wheel: 6 x interchangeable dichroic filters + open (incl. Spectral Enhancement Filter), indexing, continuous rotation, random color
- Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction
- Iris: Variable 0 - 100%, pulse effects
- Framing: Rotatable framing module, +/- 83°, 4 x individually controllable full curtain blades with full variable angle (+/- 30°) through the entire insertion path from 0 - 100%
- Prism: 4-facet, indexing and continuous rotation
- Frost: Variable 0 - 100%, second (heavy) frost available as optional replacement for Prism
- Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
- Color temperature control: Variable 5800 - 2850 K
- Dimming options: Choice of four dimming curves
- Zoom: Motorized
- Pan: 540°, coarse & fine control and speed
- Tilt: 268°, coarse & fine control and speed
- P3: Videomapping of fixture color and/or intensity with variable crossfade between DMX control and video control
- Focus: Motorized, range varies with zoom angle, from approx. 4.5 m (14.8 ft.) to infinity
- Rotating gobo wheel 1: 5 x interchangeable gobos + open, indexing, continuous rotation and shake
- Rotating gobo wheel 2: 5 x interchangeable gobos + open, indexing, continuous rotation and shake
- Gobo Color Temperature Correction: Automatic
Control And Programming:
- Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3Protocol detection: Automatic
- DMX channels: Standard 48, Extended 58
- Setting and addressing: Display Menu, RDM, RDM over Art-Net or P3
- DMX Modes: Two
- 16-bit Controllable Parameters: Dimming, Color Mixing + CTC, Gobo
- Rotation/Indexing, Framing, Iris, Zoom, Focus, Pan and Tilt
- Fixture Identification: User-settable ID number
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-NetsACN Compliance: ANSI E1.31 - 2016
- Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
- DMX/RDM Transceiver: Galvanic-isolated RS-485
- Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
- Firmware update: USB memory device, via DMX using Martin Companion or via Ethernet using P3 System Controller
- Local User Interface: Backlit LCD Display with battery-powered operation
Optics:
- Front lens diameter: 160 mm
- Zoom range: 8.0° - 54° (1:7 field angle)
- Light source: 84 x 20 W White LEDs in a custom Martin engine
- Minimum LED lifetime: >50,000 hours (to >80% luminous output)/ >20,000 hours (to >90% luminous output)*
- Maximum Total LED Engine Power: 1150 W
*Figure obtained under manufacturer's test conditions
Photometric Data:
Light engine luminous output: 90,000 lumensLED refresh rate : 3000 Hz
Standard
- Fixture luminous output: 46,500 lumens
- CRI (Color Rendering Index): 66 (+/- 3)
- TM-30 Rf (IES TM-30-15 Fidelity Index): 66
- TM-30 Rg (IES TM-30-15 Gamut Index): 95
- CCT: 5800 K (+/- 250 K)
- Peak Luminous Intensity: 3,000,000 cd
With Spectral Enhancement Filter at 5300 K
- Fixture luminous output: 23,500 lumens
- CRI (Color Rendering Index): 83 (+/- 3)
With CTO and Cyan at 3200 K
- Fixture luminous output: 12,000 lumens
- CRI (Color Rendering Index): 90 (+/- 3)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
Construction:
- Housing: High-impact flame-retardant thermoplastic
- Color: Black
- Protection rating: IP20
Gobos:
- Maximum image diameter: 30 mm (1.181 in.)â
- External diameter: 37.5 mm +0 / -0.2 mm (1.476 in. +0 / -0.008 in.)
- Maximum gobo thickness: 1.1 mm (0.04 in.)
- Coating: Heavy matted aluminum
- Material: Borofloat 33
Installation:
- Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets
- Location: Dry location only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to combustible materials: 0.2 m (8 in.)
- Minimum distance to illuminated surfaces: 4.75 m (15.6 ft.)
Connections:
- DMX and RDM data in/out: 5-pin locking XLR
- AC mains power input.: Neutrik TRUE1 socket, accepts TRUE1
- NAC3FX-W (TOP) connector
- Ethernet (Art-Net, sACN and P3) in/out, including fail-safe bypass: Neutrik etherCON
- Firmware from flash memory: USB 2.0 port
Electrical:
- AC power: 200-240 V
- AC nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Maximum total power consumption: 1450 W
- Typical half-cycle RMS inrush current at 230 V, 50 Hz: 17 A
- Maximum total current at 200 V: 8.0 A
- Maximum total current at 240 V: 6.7 A
- Power consumption, all effects static, zero light output: 100 W
Typical Power And Current:
- 208 V, 60 Hz: 6.8 A, 1380 W, PF 0.99
- 230 V, 50 Hz: 6.0 A, 1380 W, PF 0.99
- 240 V, 50 Hz: 5.8 A, 1380 W, PF 0.99
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
PF = power factor.
Thermal:
- Cooling: Forced air (temperature regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature (Ta min.): 5° C
- Maximum surface temperature, steady state, at 40° C ambient: 85° C (185° F)
- Total heat dissipation (calculated, +/- 10%): 4950 BTU/hr.
Acoustic Data:
- Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 36.5 dB(A)
- Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 35.1 dB(A)
Environmental:
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Efficacy (max output): 33 lm/w
- LWR*: 1,096 lm/kg (479 lm/lb)
LWR = Lumen-to-Weight Ratio
Approvals:
- Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55032; EN 61547; EN 55035; EN 61000-3-2,-11
- US safety: UL 1573
- US EMC: FCC Part 15 Class B
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class B, ICES-005 Class B
- Australia/NZ: RCM
Related Items:
- Martin Companion Cable (for firmware update over DMX): P/N 91616091
- Martin Companion Software (for firmware update over DMX): Free download from www.martin.com
Accessories:
Optical Accessories
- Heavy-frost/wash filter (prism replacement): P/N MAR-91614060HU
- Heavy-frost/wash filter (light frost replacement): P/N MAR-91614063HU
Transport and Storage
Flightcase for 2 x MAC Ultra Performance/Wash without SIP inserts: P/N 91515055
Consumables
- Air filter, MAC Quantum / MAC Ultra, set of 12: P/N 50400765
- CR123A 3-volt lithium battery: P/N 05801011
Power Input Cables
- Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
- Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91611786
- Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173
- Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91610174
Power Input Connector
Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU
Installation Hardware
- G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
- Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
- Half-coupler Clamp: P/N 91602005
- Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
- Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Ordering Information:
- MAC Ultra Performance, SIP (in cardboard box with SIP foam flight case insert): P/N 90250055HU
- MAC Ultra Performance, white finish, SIP (in cardboard box with SIP foam flight case insert): P/N 90250060HU