Physical:
- Length: 452 mm (17.8 in.)
- Width: 480 mm (18.9 in.) across yoke
Height:
- 740 mm (29.2 in.) maximum
- 731 mm (28.8 in.) head straight up
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
Dynamic Effects:
- Pre-programmed effects: Two ranges of FX, independent or synchronized/combine
- Color mixing: CMY, independently variable 0 - 100%
- Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
- Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction
- Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shakeIris: Variable 0 - 100%
- Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
- Frost: Variable 0 - 100%
- Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
- Color temperature control: Variable 3000 - 7000 K
- Dimming options: Choice of four dimming curves
- Zoom: Motorized
- Pan: 540°
- Tilt: 268°
- Position correction system: Absolute position monitoring
- Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Control And Programming:
- DMX channels: 38
- 16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
- Movement control options: Tracking and vector
- Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
- Fixture Identification: User-settable ID number
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Transceiver: Opto-isolated RS-485
- Fixture software update: USB memory device or over DMX link
Optics:
- Zoom range: 12° - 48° one-tenth peak (1:4)
- Light source: 468 W custom Martin LED engine
- Minimum LED lifetime: 50,000 hours (to >80% luminous output)
**Figure obtained under manufacturer's test conditions
Photometric Data:
- Light engine luminous output: ≥ 31,500 lumens
- Fixture luminous output: 9,200 lumens
- CRI (Color Rendering Index) : >90
- CQS (Color Quality Scale): >90
- TM-30 Rf (IES TM-30-15 Fidelity Index): >90
- TM-30 Rg (IES TM-30-15 Gamut Index): >98
- TLCI (Television Lighting Consistency Index): >90
- CCT: 3000 K (+/- 250 K)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
Construction:
- Housing: High-impact flame-retardant thermoplastic
- Color: Black
- Protection rating: IP20
Installation:
- Mounting points: 4 pairs of 1/4-turn locks
- Location: Dry location only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to combustible materials: 0.2 m (8 in.)
- Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
Connections:
- AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
- DMX and RDM data in/out: 5-pin locking XLR
Electrical:
- AC power: 120-240 V nominal, 50/60 Hz
- Power Consumption: 64 W, all effects static, zero light output
- Power supply unit: Auto-ranging electronic switch-mode
- Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Typical Power And Current:
- 120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
- 208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
- 230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
- 240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor.
Thermal:
- Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
- Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
Environmental:
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Efficacy (max output): 16 lm/w
- LWR*: 297 lm/kg (135 lm/lb)
LWR = Lumen-to-Weight Ratio
Approvals:
- EU safety: EN 60598-2-17, EN 62471, EN62493
- EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA C22.2 No. E598-2-17
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM
Related Items:
- Martin Companion Cable: P/N 91616091
- Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
Accessories:
- Gelframe MAC Encore: P/N 91001000
- Set of Followspot Handles MAC Encore: P/N 91001001HU
- Heavy Frost Assy MAC Encore Performance: P/N 91001002HU
- SIP Packaging MAC Encore Family: P/N 91616115HU
- Static GOBO Wheel MAC Encore Performance: P/N 91001003
- Top Hat MAC Encore Performance: P/N 91001004
Cables and connectors:
- Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
- Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
- Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
- Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
- Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789
*Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts
Installation hardware:
- G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
- Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
- Half-coupler Clamp: P/N 91602005
- Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
- Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
Ordering Information:
- MAC Encore™ Performance WRM EPS (in cardboard box, polystyrene packaging): P/N 90234015HU
- MAC Encore™ Performance WRM SIP (in cardboard box with SIP foam flightcase insert): P/N 90234016HU
- MAC Encore™ Performance WRM, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234020HU