Martin Exterior Projection 500 - Proiector Imagini Arhitectural Outdoor LED - Martin

Cod Produs: Exterior Projection 500 Ai nevoie de ajutor? 0790 99 99 22
  • Descriere
  • Caracteristici
  • Video (1)
  • Review-uri (0)

The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.
 

Creating custom gobos for building facades
 

Learn more about our product verification and reliability

  • Flat-field, high-contrast image projection 
  • Fully weatherized for trouble-free use with minimal maintenance in outdoor installations
  • Packed with features, allowing huge creativity in setting up exciting lighting effects


 

FEATURES

  • Up to 6100 lumens output with 4 beam angles variants from narrow to wide
  • Powerful close-range and long-range projection
  • Flat-field, high-contrast image projection based on high-power LED engine
  • 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
  • Crisp image projection
  • Rugged IP66-rated housing
  • Minimal maintenance – low total cost of ownership

Physical:

  • Length: 415 mm (16.4 in.)
  • Width: 293 mm (11.6 in.)
  • Height: 444 mm (17.5 in.)
  • Weight: 17.5 kg (38.6 lbs.)
All figures include mounting yoke

Dynamic Effects:

  • Color wheel: 8 interchangeable colors + open
  • Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
  • Gobo animation: Variable speed linear animation effect
  • Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
  • Frost (wash effect): Motorized variable
  • Dimming: Electronic, constantly variable 0-100%, 16-bit control
  • Shutter: Strobe and pulse effects, instant open and blackout
  • Focus: Motorized, variable 3 m (9.8 ft.) to infinity

Control And Programming:

  • Control options: DMX, RDM, standalone
  • Stand-alone control: Up to 20 scenes with global fade/hold times
  • Configuration, addressing and status: Onboard control panel with OLED display
  • DMX channels: 13
  • 8-bit control: color/gobo selection, prism, frost, animation
  • 16-bit control: Gobo indexing and rotation, focus and intensity
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20

Optics:

  • Light source: 230 W white light LED engine
  • CRI (Color Rendering Index): 72
  • Color temperature: 8300 K
  • LED lifetime: 20,000 hours (to >70% luminous output)*
  • LED manufacturer: Prolight Opto
  • Binning: Tight color and flux binning
*Figure obtained under manufacturer's test conditions
 

Photometric Data:
Narrow:

  • Cut-off angle: 12°
  • Total output: 5000 lumens
  • Center peak: 203,000 cd
Medium:
  • Cut-off angle: 22°
  • Total output: 6100 lumens
  • Center peak: 77,000 cd
Wide:
  • Cut-off angle: 37°
  • Total output: 5700 lumens
  • Center peak: 28,000 cd
Very Wide:
  • Cut-off angle: 50°
  • Total output: 3400 lumens
  • Center peak: 11,000 cd

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
 

Construction:

  • Housing: Cast aluminum
  • Finish: Hard anodized, metallic grey lacquered
  • Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
  • Ingress protection: IP66
  • Impact resistance: IK08 (with control panel display cover plate installed)
  • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
  • Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
  • 0,7g RMS Random (IEC 60068-2-64)
  • EPA (Effective Projected Area): 0.15 m2RoHS compliant

Gobos:

  • Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)
  • Alternative material: Aluminum 1060, paint on front lens side, 450° C (842° F)
  • Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
  • Maximum image diameter: 23 mm (0.91 in.)
  • Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
  • Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
  • Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)HT paint

Installation:

  • Mounting: Adjustable yoke
  • Location: Suitable for wet locations. Do not immerse in water.
  • Orientation: Any (sides must be kept vertical)
  • Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections:

  • Power cable entry: IP68 cable gland
  • Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
  • Data cable entry: IP68 cable gland
  • Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical:

  • AC power: 100-240/277 V nominal, 50/60 Hz
  • Power Supply: Auto-ranging electronic switch-mode
  • Typical half-cycle RMS inrush current: 8.4
  • AIdle power (zero intensity, no effects applied): 32 W, 0.3 A
  • Surge protection: 4 KV

Typical Power And Current:
110 V, 60 Hz: 320 W, 2.9 A, PF 0.977230 V, 50 Hz: 310 W, 1.4 A, PF 0.971277 V, 60 Hz: 305 W, 1.2 A, PF 0.950

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal:

  • Maximum surface temperature: 85° C (185° F)
  • Cooling: Convection, internal forced air
  • Maximum ambient temperature (Ta max.): 45° C (113° F) *
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
  • Total heat dissipation (calculated): 1100 BTU/hr.

*Above this temperature, the fixture regulates output to protect from overheating.
** An integrated heat-element will heat-up internal components at ambient temperatures below 0° C (32° F) - For instant wake-up with no warm-up time, leave power applied constantly.

Environmental:

  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant
  • Efficacy (max output): 20 lm/W
  • LWR*: 349 lm/kg (158 lm/lb)

LWR = Lumen-to-Weight Ratio

Approvals:

  • Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
  • EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
  • US safety: ANSI/UL 1598
  • US EMC: CFR 47 Part 15 Class A
  • Canadian safety: CSA C22.2 No 250.0
  • Australia/NZ: RCM
  • India: BIS

Related Items:

  • Martin Companion Cable: P/N 91616091
  • Martin Companion Software Suite (including firmware uploader)

Accessories:

  • Glare Shield, Exterior Projection 500, aluminum: P/N 91611767
  • Projection Setup Gobo: P/N 91616068
  • EP-500, Manual Framing Module: P/N 91611842
  • Ring for gobo, OD30, set of 10 pcs: P/N MAR-91611851

Spare Parts: Silica gel desiccant bag in sealed foil pack: P/N 37220000Goboholder with magnet incl. washer, short spring & long spring: P/N 50481990Goboholder without magnet incl. washer, short spring & long spring: P/N 50481992

Ordering Information:
EU models:

  • Exterior Projection 500, Narrow, EU, Aluminum: P/N 90506500
  • Exterior Projection 500, Medium, EU, Aluminum: P/N 90506505
  • Exterior Projection 500, Wide, EU, Aluminum: P/N 90506510
  • Exterior Projection 500, Very Wide, EU, Aluminum: P/N 90506535
  • Exterior Projection 500, Narrow, EU, White: P/N 90506540
  • Exterior Projection 500, Medium, EU, White: P/N 90506545
  • Exterior Projection 500, Wide, EU, White: P/N 90506550
  • Exterior Projection 500, Very Wide, EU, White: P/N 90506555
US Models:
  • Exterior Projection 500, Narrow, US, Aluminum: P/N 90506515
  • Exterior Projection 500, Medium, US, Aluminum: P/N 90506520
  • Exterior Projection 500, Wide, US, Aluminum: P/N 90506525
  • Exterior Projection 500, Very Wide, US, Aluminum: P/N 90506530

Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Review-ul a fost trimis cu succes.

Suport clienti L - V: 10:00 - 18:00; S, D - Inchis

0790 99 99 22 office@cleansound.ro

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!