Exterior Projection 1000 - Proiector Imagini Arhitectural Outdoor LED - Martin

Physical:

• Length: 702 mm (27.7 in.)
• Width: 417 mm (16.5 in.)
• Height: 618 mm (24.4 in.)
• Weight: 50 kg (110 lbs.)

All figures include mounting yoke

Dynamic Effects:

• Color mixing: CMY, independently variable 0 - 100%
• Color wheel: 7 interchangeable colors + open
• Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation
• Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction
• Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
• Frost filter: Motorized, variable
• Zoom: 10° - 44° (cut-off angles)
• Dimming: Electronic, constantly variable 0-100%, 16-bit control
• Shutter: Electronic, strobe and pulse effects, instant open and blackout
• Focus: Motorized, variable 3 m (9.8 ft.) to infinity

Control And Programming:

• Control options: DMX, RDM, standalone
• Stand-alone control: Up to 20 scenes with global fade/hold times
• Configuration, addressing and status: Onboard control panel with OLED display or via RDM
• DMX channels: 20
• 8-bit control: CMY, color selection, gobo selection, prism, frost, animation
• 16-bit control: Gobo indexing and rotation, zoom, focus and intensity
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20

Optics:

• Light source: 440 W white light LED engine
• CRI (Color Rendering Index): 72
• Color temperature: 6500 K (±250 K)
• LED lifetime: 20,000 hours (to >70% luminous output)*
• LED manufacturer: Appotronics
• Binning: Tight color and flux binning

Photometric Data:
Cut-off angle: 10° - 44°Luminous intensity:

• At 10° zoom: 11,500 lumens
• At 16° zoom: 15,000 lumens
• At 40° zoom: 16,800 lumens

• At 10° zoom: 731,000 cd
• At 16° zoom: 311,000 cd
• At 40° zoom: 42,000 cd

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
 

Construction:

• Housing: Cast aluminum
• Finish: Hard anodized, white or metallic grey lacquered
• Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
• Ingress protection: IP66
• Impact resistance: IK08 (with control panel display cover plate installed)
• Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
• Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
• 0,7g RMS Random (IEC 60068-2-64)
• EPA (Effective Projected Area): 0.28m²

Gobos:

• Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F)
• Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
• Maximum image diameter: 26 mm (1.02 in.)
• Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
• Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)**

Installation:

• Mounting: Adjustable yoke
• Location: Suitable for wet locations. Do not immerse in water.
• Orientation: Any (sides must be kept vertical)
• Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections:

• Power cable entry: IP66 cable gland
• Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
• Power cable type: EU models: H07RN-F 450/700V, Ø10 mm
• US models: SJTW 14AWG, 300V, Ø9.3 mm
• Data cable entry: IP66 cable gland
• Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical:

• AC power: 100-120/200-277 V nominal, 50/60 Hz
• Power Supply: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 15.5 A
• Idle power (zero intensity, no effects applied): 75 W
• Surge protection: 4 KV

Typical Power And Current: 120 V, 60 Hz: 645 W, 5.5 A, PF 0.98230 V, 50 Hz: 635 W, 2.9 A, PF 0.95277 V, 60 Hz: 635 W, 2.6 A, PF 0.90

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
 

Thermal:

• Maximum surface temperature: 85° C (185 ° F)
• Cooling: Convection, internal forced air
• Maximum ambient temperature (Ta max.): 45° C (113° F)*
• Minimum ambient temperature (Ta min.): -30° C (-22° F)**
• Total heat dissipation (calculated): 2350 BTU/hr.

*Above this temperature, the fixture regulates output to protect from overheating.
** An integrated heat-element will heat-up internal components at ambient temperatures below 0° C (32° F) - For instant wake-up with no warm-up time, leave power applied constantly.
 

Environmental:

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 26 lm/W
• LWR*: 349 lm/kg (158 lm/lb)

LWR = Lumen-to-Weight Ratio
 

Approvals:
Global CB Certification/IECEE:
IEC 60598-2-5 (IEC 60598-1)

• EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
• US safety: ANSI/UL 1598
• US EMC: CFR 47 Part 15 Class A
• Canadian safety: CSA C22.2 No 250.0
• Australia/NZ: RCM

Related Items: Martin Companion Cable:

• P/N 91616091
• Martin Companion Software Suite (including firmware uploader)

Accessories:

• Glare Shield, Exterior Projection 1000: P/N 91611768
• Projection Setup Gobo, Exterior Projection 1000: P/N 91616075
• Ring for gobo, OD30, set of 10 pcs: P/N MAR-91611851

Spare Parts:

• Silica gel desiccant bag in sealed foil pack: P/N 37220000
• Goboholder for EP1000 with magnet incl. washer & short spring: P/N 50482185
• Goboholder for EP1000 with magnet incl. washer & long spring: P/N 50482186

Ordering Information:
EU models:

• Exterior Projection 1000, EU, Aluminum: P/N 90512000
• Exterior Projection 1000, EU, White: P/N 90512015

• Exterior Projection 1000, US, Aluminum: P/N 90512005
• Exterior Projection 1000, US, White: P/N 90512010