Martin Exterior Linear PRO-Graze - Proiector Outdoor LED Bar - Martin

Cod Produs: Exterior Linear PRO-GRAZE Ai nevoie de ajutor? 0790 99 99 22
  • Descriere
  • Caracteristici
  • Video (1)
  • Review-uri (0)

Martin Exterior Linear Pro Graze QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with color boost technology and discreet yet robust housings. Delivering uniform light distribution of 15 degrees, they are perfect for highlighting textured surfaces, walls, facades, ceilings and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other permanent indoor or outdoor installations.

Graze QUAD models feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full-powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated. Optional micro lens film can be added for a wide range of additional beam configurations.

Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.

With a high focus on sustainability, these lights can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.



 

FEATURES

  • Color-calibrated QUAD color LEDs (8 LEDs/ft)
  • Homogenous color mixing
  • Narrow 15° beam angle
  • Dedicated color temperature control channel (1800K - 12000K) 
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width

Physical:

  • Width: 40 mm (1.57 inch.)
  • Height: 68 mm (2.67 inch)
  • Length - 1 ft Version: 312mm (1.02 ft)
  • Length - 4 ft Version: 1227mm (4.02 ft)
  • Weight - 1 ft Version: 0.85 kg (1.9 lbs)
  • Weight - 4 ft Version: 2.8 kg (6.2 lbs)

Dynamic Effects:

  • Color mixing: RGBW
  • Color temperature control: CCT: 1800K – 12000K (default 4000K)
  • Intensity: 0 - 100%
  • Segment Control: 0.5 ft, 1 ft or full 4 ft fixture control

Control And Programming:

  • Control systems: DMX, RDM
  • Control resolution: 8-bit DMX individual color control
  • User interface: Magnetic button to call up fixture status and test fixture
  • Stand-alone control: Up to 20 scenes with individual fade/hold times
  • DMX compliance: USITT DMX512/1990
  • RDM compliance: ANSI/ESTA E1.20
  • Dimmer Resolution: 16-bit DMX control of intensity
  • DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)
  • DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)

Optics:

  • Light source: QUAD color LED (8 LEDs per foot)
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • Binning: Tight color and flux binning
  • Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
  • Beam angle**: 15° , 15° x 30°, 15° X 60°
*Figure obtained under manufacturer's test conditions
** Asymmetric beam angles for available as accessory micro-lens films

Photometric Data:
CRI (Color Rendering Index) : >70CCT: 1800K – 11000K (default 4000K)Luminous output:

  1 ft at 12W 4 ft at 12W
FULL: 700 lumens 2980 lumens
RED: 260 lumens 1210 lumens
GREEN: 570 lumens 2370 lumens
BLUE: 120 lumens 530 lumens

* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction:

  • Housing: Aluminum
  • Finish: Clear anodized (standard) or optional colors on request
  • Front: Clear polycarbonate
  • Protection rating: IP66
  • IK rating: IK08
  • Effective Projected Area (EPA): 0.04 m2 per ft
  • Corrosion resistance: C5 - very high corrosivity / Durability Range: High (ISO 12944-6)
  • Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Electrical:

  • AC power: 100-277 V nominal, 50/60 Hz
  • Typical half-cycle RMS inrush current: 0.35 A
  • Power supply unit: Auto-ranging electronic switch-mode
  • Surge protection: 4KV
  • Power/data in/thru: 8-pin custom connectorsIdle power consumption: 1 ft length :1.54 W, 4 ft length: 2.30W (steady state, all LEDs at zero intensity)
  • Max earth leakage: 1 ft length: 0.15 mA, 4 ft length: 0.21 mA
  • Maximum connected 4ft fixtures*: 42 pcs (52 m /169 ft) @ 230V-277V
  • Maximum total string length (cable + fixtures)*: 150 m / 328 ft
* Refer to system diagram for details on fixture run limitations

Typical Power And Current:
12W mode:

  • 100-240 V, 50/60 Hz: 12 W per foot +/- 1 W, PF 0.95 +/- 0.05
  • 277 V, 50/60 Hz: 12 W per foot +/- 1 W, PF 0.90 +/- 0.05

10W mode:
  • 100-240 V, 50/60 Hz: 10 W per foot +/- 1 W, PF 0.95 +/- 0.05
  • 277 V, 50/60 Hz: 10 W per foot +/- 1 W, PF 0.90 +/- 0.05

5W mode:
  • 100-240 V, 50/60 Hz: 5 W per foot +/- 0.5W, PF 0.90 +/- 0.05
  • 277 V, 50/60 Hz: 5 W per foot +/- 0.5W, PF 0.70 +/- 0.05
Power figures are typical, not maximum. Measurements made at nominal voltage. Allow for +/- 10% deviation. PF = Power factor.

Thermal:

  • Cooling: Convection
  • Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
  • Maximum ambient temperature: 45° C (113° F)*
  • Minimum ambient temperature: -30° C (-22° F)
*Above this temperature, the fixture regulates output to protect from overheating

Environmental:

  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant
  • FSC: Certified cardboard inlay and outer packaging
  • Efficacy (max output): 54 lm/W
  • LWR*: 765 lm/kg (342 lm/lb)

*LWR = Lumen-to-Weight Ratio

Approvals:

  • Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
  • EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
  • US safety: ANSI/UL 1598US EMC: 47 CFR Part 15 Class B
  • Canadian safety: CSA C22.2 No. 250.0
  • Australia/NZ: RCM
  • India: BIS IS 10322(Part5/section5)

Related Items:

  • Martin Companion Cable: P/N MAR-91616091
  • Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com

Accessories:

  • Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022
  • Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023
  • Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025
  • Flange bracket EL Pro 10 pcs: P/N MAR-90570026
  • Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027
  • Junction Box Power DMX to PD: P/N MAR-91700019
  • Power DMX Cable PD PD 0.2M EU: P/N MAR-91700004
  • Power DMX Cable PD PD 1M EU: P/N MAR-91700005
  • Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006
  • Power DMX Cable PD PD 5M EU: P/N MAR-91700007
  • Power DMX Cable PD PD 10M EU: P/N MAR-91700008
  • Power DMX Cable 100M Roll EU: P/N MAR-91700009
  • Power DMX Cable PD PD 0.2M US: P/N MAR-91700010
  • Power DMX Cable PD PD 1M US: P/N MAR-91700011
  • Power DMX Cable PD PD 2.5M US: P/N MAR-91700012
  • Power DMX Cable PD PD 5M US: P/N MAR-91700013
  • Power DMX Cable PD PD 10M US: P/N MAR-91700014
  • End termination cap PD: P/N MAR-91700015
  • Power DMX Cable 100M Roll US: P/N MAR-91700016
  • Louvre, EL Pro Quad 1ft set of 4: P/N MAR-90570024
  • Bulk connector PD female: P/N MAR-91700017
  • Bulk connector PD male: P/N MAR-91700018

Ordering Information:

  • Exterior Linear Pro graze QUAD 1ft: P/N MAR-90570000
  • Exterior Linear Pro graze QUAD 4ft: P/N MAR-90570003

Other Specifications: Asymm diffuser Narrow EL Pro 4ft, 6 pcs: P/N MAR-9057002
Asymm diffuser Wide EL Pro 4ft, 6 pcs: P/N MAR-90570020

Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Review-ul a fost trimis cu succes.

Suport clienti L - V: 10:00 - 18:00; S, D - Inchis

0790 99 99 22 office@cleansound.ro

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!